Capsules With HT Tuffryn® Membrane
HT 멤브레인 캡슐 Consumable > Filter > Capsule Filter- 제품설명
-
- 정확한 충전, 균일 한 흐름 및 우수한 처리량을 얻습니다. 내장 된 에어 벤트는 갇힌 기포를 제거
- 제품 및 시스템 무결성을 보장하기 위해 무결성 테스트 가능
- 감마선 조사에 의한 살균은 EtO 잔류 물에 의한 잠재적 오염을 제거
- 연락처
-
경기본사 : 031-790-1907 (내선1)
대전지사 : 042-824-5167
| *Capsules with HT Tuffryn membrane | ||
| P/N | Description | Pkg |
| 12158 | Micro culture capsule with filling bell, 0.2/0.2μm, 300cm2, gamma-irradiated |
1/pkg |
| 12140 | Culture capsule, 0.2/0.2μm, 500cm2, gamma-irradiated |
1/pkg |
| 12170 | Culture capsule with filling bell, 0.2/0.2μm, 500cm2, gamma-irradiated |
1/pkg |
| 12141 | Maxi culture capsule, 0.2/0.2μm, 1290cm2, gamma-irradiated |
1/pkg |
| *Accessories and replacement parts | ||
| P/N | Description | Pkg |
| 4227 | Filling bell, sterile | 5/pkg |
*Applications
- 1~10L 범위의 batches 여과에 사용(micro culture capsule) 및
완충액 및 세포배양배양액 10~20L에 사용(culture and maxi culture capsules)
- 1~10L 범위의 batches 여과에 사용(micro culture capsule) 및
완충액 및 세포배양배양액 10~20L에 사용(culture and maxi culture capsules)
| Materials of Construction | Filter media: HT Tuffryn membrane(polysulfone) Housing and filling bell: Polycarbonate Vent plug and core: Polypropylene Filter support: Polyester Sealing materials: Polyurethane |
| Effective filtration area | PN 12158: 300cm2 PN 12140 and 12170: 300cm2 PN 12141: 300cm2 |
| Inlet/Outlet connections | PN 12140, 12170 and 12141: Hose barb fittings accept 12.7mm (1/2 in.) ID tubing PN 12158: Stepped hose barbs 6.4 - 9.5mm (1/4 - 3/8 in.) diameter |
| Typical Hold-up volume | with 0.7 bar(70kPa, 10psi) air purge PN 12158: 15mL PN 12140 and 12170: 25mL PN 12141: 113mL |
| Maximum operating temperature | 100℃(212℉) |
| Maximum operating pressure | 3.4 bar (340kPa, 50psi) at ambient temperature |
| Recommended Integrity test minimum bubble point-Water |
2.4 bar (240kPa, 35psi) |
| Typical water flow rate | L/min at 0.7bar(70kPa, 10psi) PN 12158: 1.2 PN 12140, and 12170: 2.0 PN 12141: 5.2 |
| Bacterial retention | Lot samples retain a minimum of 107 cfu/cm2 of B. Diminuta per modified ASTM F838, current revision |
| Endotoxin level | < 0.5 EU/mL using Limulus Amoebocyte Lysate (LAL) test |
| Biological safety | Passes Unitied States Pharmacopeia (USP) Biological Reacitivity Test, In Vivo <88> |
| Sterilization | Sterilized by gamma irradiation. If desired, autoclave once only prior to use at 121- 123℃(250-253℉) for a maximum of 20 min. |
