Prouduct
Precision Pump
-
LS-TORX Driver
토크드라이버(LS-TORX Driver)
- T7 TORX driver for installing breadboard screws.
- Maker : Labsmith / USA
-
LS-HEX 1/8 Hex Wrench
렌치
- 1/8" hex wrench for installing one-piece fittings and plugs.
- Maker : Labsmith / USA
-
Chip Reservoir
칩저장소(Chip Reservoir)
- 칩위에 bond를 이용하여 Fitting을 고정 및 액체를 저장 할 수있는 reservoir
- Threads into Bonded Port Connector to provide fluid reservoir
- Luer tip syringe로 액체 주입가능
- Material: PEEK
- Volume: 85ul
- Maker : Labsmith / USA
-
Male Mini Luer Fluid Connectors
Male 루어 커넥터
- Microfluidic chipshop의 Mini Luer chips전용 connectors
- Maker : Labsmith / USA
-
Bonded-Port Connector
접착커넥터
- 본드를 이용한 chip위에 connector 고정시 사용
- Bonds to port on chip for capillary-chip interface
- Compatible with ~1mm port size
- Material: Ultem®
- Maker : Labsmith / USA
-
Straight 8-channel Luer Chips
8채널 루어 칩
- Microfluidic ChipShop chips with 8-parallel channels
- Fluidic interface: Luer
- Choose material (PMMA or TOPAS) and channel dimensions.
- Maker : Labsmith / USA
-
Straight 4-channel Mini-Luer Chips
4채널 루어 칩
- Microfluidic ChipShop chips with 4 parallel channels
- Fluidic interface: Mini-Luer. Choose material (TOPAS or PMMA) and channel dimensions.
- Maker : Labsmith / USA
-
Straight 16-channel Through-hole Chips
16채널 칩
- Microfluidic ChipShop chips with 16 straight channels
- Fluidic interface: through-hole
- Chose material (PMMA or TOPAS) and channel dimensions.
- Maker : Labsmith / USA
-
Cross-channel Through-hole Chips
크로스채널칩
- Microfluidic ChipShop chips with two perpendicular channels
- Fluidic interface: through hole (0.5mm holes)
- Choose material (TOPAS or PMMA) and channel dimensions.
- Maker : Labsmith / USA
-
Cross-channel CapTite microfluidic chip
크로스채널칩-CAPTITE전용
- Microfluidic ChipShop cross-channel chip with direct connection to LabSmith_s
- CapTite one-piece fittings (C360-100) and chip reservoirs (C360-405R)
- Channel dimensions: 75um x 75um x 87.0mm long channel.
- Over all chip dimension is 95.5mm x 16mm x 1.5mm
- Material: PMMA
- Maker : Labsmith / USA
-
Needle Connector
니들 커넥터
- Needle Y and Cross connectors.
- 27 gauge needle interconnects for low-pressure connection to 0.016" ID flexible tubing
- Material: Ultem (body) and 316 stainless steel needles
- Maker : Labsmith / USA
-
Breadboard Reservoir
Breadboard 저장소
- 액체를 저장하거나 반응시킬수 있는 저장소
- Reusable PEEK™ 1.1mL reservoir with cap and four ports for CapTite connectors to 360um capillary or 1/16" tubing
- Maker : Labsmith / USA
